FusionServer 5288 V6 is a 4U 2-socket rack server that meets service requirements such as hot, warm, and cold data tiered deployment and historical data archiving. With its efficient design, FusionServer 5288 V6 ensures excellent computing performance and provides flexible and ultra-large local storage expansion capabilities, reducing data storage costs. The 5288 V6 can be configured with two Intel Xeon scalable processor, 32 DDR4 DIMMs, and 44 3.5-inch + 4 NVMe SSDs in a 4 U space. Integrates patented technologies such as DEMT intelligent power management and FDM intelligent fault management, and can be configured with FusionDirector full-lifecycle management software, effectively reducing OPEX and improving ROI.
Digital currency, cold data storage, SDS and video storage
ConsultFusionServer 5288 V6 is a 4U 2-socket rack server, applicable to services such as tiered storage of hot, warm, and cold data, and historical data archiving. With high efficiency design, the server ensures excellent computing performance and provides flexible and ultra-large local storage scalability to reduce data storage costs. The 5288 V6 is configured with two Intel® Xeon® Scalable processors and supports up to 32 DDR4 DIMMss, and 44 x 3.5-inch PLUS 4 NVMe SSDs for local storage. It incorporates patented technologies, such as DEMT and FDM, and integrates FusionDirector software for entire-lifecycle management, helping customers drive down OPEX and improve ROI.
Ultra-Large Capacity and Tiered Storage
• Two Intel® Xeon® Scalable processors can run on a 4U space, with an UPI bus speed of up to 11.2 GT/s between processors. Each processor supports up to 40 computing cores. It supports Intel® Turbo Boost, hyper-threading, and AVX-512, improving the computing performance of a single processor by up to 46% compared with that of the previous generation.
• Provides 32 DDR4 DIMMss and delivers memory capacity of up to 8.192 TB (with 256 GB DIMMs). This is ideal for application scenarios that require large-capacity memory.
• Supports the use of 16 Optane™ PMem 200 series as volatile or non-volatile storage with 16 DDR4 DIMMss. The memory capacity is up to 12 TB (with 512 GB Optane™ PMem and 256 GB DDR4 DIMMs) to meet the demands of various workloads.
• Supports 44 x 3.5-inch PLUS 4 x NVMe SSDs and provides large storage space, making them ideal for hot, warm, and cold data tiered storage.
• Supports eight half-height half-length GPU acceleration cards to meet video analytics service requirements.
• Supports OCP 3.0 NICs. The two FlexIO card slots support two OCP 3.0 network adapter respectively, which can be configured as required.
• Supports boot speedup storage technology (BSST). The OS is installed on two M.2 SSDs, which is deployed separately from service data. Supports hardware RAID and hot swappable for M.2 SSDs.
Smart Power Saving and Better Energy Efficiency
• Adopts DEMT, driving down overall equipment power consumption by up to 18% without compromising workload performance through multiple power-saving measures such as component hibernation, PID algorithm based fan speed tuning, and activestandby power supplies.
• Uses 80 PLUS® Titanium PSUs that provide a conversion efficiency of up to 96% and has passed the Energy Conservation and Environmentally-friendly Certification released by CQC.
• Supports 900 W, 1500 W, and 2000 W PSU options, adapting flexibly to different power requirements and improving energy efficiency.
Intelligent Management and Open Integration
• Integrates FusionDirector for intelligent full-lifecycle O&M, improving O&M efficiency by 30%.
» Intelligent maintenance integrates diagnosis and recovery, and accurately manages key components. The fault diagnosis accuracy reaches 93% and the breakdown rate decreases by 50%.
» Intelligent upgrade enables one-click automation, cloud-based collaboration for quick policy formulation, and firmware versions automatic completeness and upgrade in batches, improving efficiency by 20x.
» Intelligent discovery enables 100% accuracy of component-level visualization, automatic asset inventorying in seconds,
and real-time track tracing.
» Intelligent energy saving enables refined dynamic energy management. It integrates the DEMT 2.0, saving 18% of the
system energy.
» Intelligent deployment enables pipelined deployment and one-click switchover on demand, improving deployment efficiency by 10x.
• Provides standardized open interfaces and development guides, facilitating seamless integration with third-party management software.
| Form Factor | 4U Rack Server |
| Processors | 1/2 3rd Generation Intel® Xeon® scalable processor (Ice Lake) (8300 / 6300 / 5300 / 4300 Series) , up to 270W |
| Chip Set | Intel® C621A |
| Memory | 32 DDR4 memory slots, up to 3200 MT/s; Up to 16 Intel® Optane TM Persistent Memory 200 Series, up to 3200MT/s |
| Local Storage | Various hard disk configurations are supported. The hard disks are hot swappable: |
| · 36 to 44 3.5-inch SAS/SATA HDDs and 4 NVMe SSDs | |
| · 24 x 3.5-inch SAS/SATA front hard disks | |
| · 4 3.5-inch SAS/SATA internal hard disks | |
| · 16 3.5-inch SAS/SATA hard disks and four 2.5-inch SAS/SATA/NVMe rear hard disks | |
| · 12 3.5-inch SAS/SATA disks and eight 2.5-inch rear hard disks (4 x 2.5″ HDDs + 4 x 2.5″ SAS/SATA/NVMe) | |
| Flash storage: | |
| · Dual M.2 SSDs | |
| RAID Support | Supports RAID 0, 1, 5, 50, 6, and 60, cache supercapacitor protection, RAID level migration, disk roaming, self-diagnosis, and web-based remote configuration, and multiple network expansion capabilities |
| Network | OCP 3.0 NIC |
| The two FLEX I/O card slots support two OCP 3.0 NICs, which can be configured as required | |
| Supports multiple OCP 3.0 NICs | |
| Supports hot swap | |
| PCIe Expansion | A maximum of 11 PCIe 4.0 slots, including one dedicated PCIe slot for the RAID controller card, two dedicated FLEX I/O slots for OCP3.0, and eight standard PCIe 4.0 slots |
| Fan Modules | 4 hot-swappable fans, supporting N+1 redundancy |
| Power Supply | 2 redundant hot-swappable PSUs are configured in 1+1 redundancy mode. The optional specifications are as follows: |
| · 900W AC Platinum/Titanium power supply (Input: 100–240 V AC or 192–288 V DC) | |
| · 1500 W AC Platinum PSU | |
| · 1000 W (input: 100 V AC to 127 V AC) | |
| · 1500 W (input: 200–240 V AC or 192–288 V DC) | |
| · 2000 W AC Platinum PSU | |
| · 1800 W (input: 200–220 V AC or 192–200 V DC) | |
| · 2000 W (input: 220–240 V AC or 200–288 V DC) | |
| Management | · The BMC chip integrates one dedicated management GE network port to provide comprehensive management features such as fault diagnosis, automatic O&M, and hardware security hardening |
| · The BMC supports standard interfaces such as Redfish, SNMP, and IPMI2.0. Provides a remote management interface based on HTML5/VNC KVM. Supports out-of-band management functions, such as monitoring, diagnosis, configuration, agentless, and remote control, simplifying management | |
| · FusionDirector management software can be used to provide advanced management features such as five intelligent features, implementing intelligent, automatic, visualized, and refined management throughout the lifecycle | |
| Operating Systems | Microsoft Windows Server、SUSE Linux Enterprise Server、VMware ESXi、Red Hat Enterprise Linux、CentOS、Oracle Linux、Ubuntu、Debian、openEuler etc |
| Security Features | Security features such as power-on password, administrator password, TPM 2.0, security panel, secure boot, and cover opening detection |
| Operating Temperature | 5°C to 45°C (41°F to 113°F) (ASHARE Class A1/A2/A3) |
| Certifications | CE、UL、CCC、FCC、VCCI、RoHS etc |
| Installation Kit | L-shaped guide rails, retractable guide rails, and holding rails |
| Dimensions (H x W x D) | Chassis dimensions: 175 mm x 447 mm x 790 mm |
CN
EN
