Nettrix R420 G30 is a 2U universal 2-Socket rack server with ultra-high cost performance. It achieves ultimate cost optimization while meeting the computing power requirement, and can flexibly configure storage and network resources.
It is widely used in business scenarios such as big data, virtualization and database, and brings good return on investment to customers.
Consult
Balanced performance and high cost performance
Supports 2nd generation Intel® Xeon® Scalable processors;
Powerful computing performance, new 2 UPI interconnection architecture, bus bandwidth up to 10.4 GT/s;
Supports DDR4 2933MHz memory frequency, memory bandwidth increased by 20% compared to the previous generation.
Flexible configuration and choice
Decoupling of hardware modules enables arbitrary configuration of computing, network, and storage to meet different business needs;
Supports 12 3.5-inch hard drives, compatible with NVMe SSD, fully realizing personalized selection of storage resources;
The onboard integrated Gigabit network card can flexibly expand OCP network cards and PCI-E cards, and configure network resources on demand.
Intelligent management, green energy saving
For large-scale data center deployment, it provides an open management platform that fully covers multiple management protocols such as RedFish, IPMI, and SNMP;
Further optimize operation and maintenance efficiency, provide health status monitoring and reporting functions of key components, and realize intelligent operation and maintenance services throughout the product life cycle;
Embracing the business demands of green and energy-saving, a new high-efficiency, energy-saving and intelligent speed adjustment design is added to enable the entire machine to dissipate heat;
According to the ambient temperature and actual load conditions, the power consumption of the entire machine is saved without affecting the load performance, achieving green and energy-saving effects.
Form | 2U rack server |
Processor | Supports 2 2nd Generation Intel® Xeon® Scalable Processors |
Chipset | Intel C620 Series Chipset |
Memory | 16 DDR4 memory slots, 2933MHz, supports various protection modes such as memory ECC, memory mirroring, memory hot backup, etc. Compatible with 4 DCPMM memories, 2666MHz |
Storage Controller | Supports pass-through, RAID0, 1, 10, 5, 50, 6, 60 and other storage solutions. When configuring a RAID controller, it can support Cache supercapacitor protection and provide functions such as RAID level migration, disk roaming, self-diagnosis, and Web remote settings. |
Local Storage | Front: supports 12 3.5-inch or 2.5-inch hard drives, compatible with 8 NVMe hard drives Rear: supports 2 2.5-inch hard drives Built-in: 1 SATA / PCI-E M.2, 1 SD card |
Network Interface | Onboard network card: 2 GE interfaces + 1 OCP, with NCSI function. OCP can be equipped with 2*GE, 2*10GE, 2*25GE and other interfaces |
Pci-E Extension | Configurable 6 PCI-E 3.0 expansion slots, including 1 dedicated slot for hard disk controller and 1 OCP slot |
Other Interfaces | 1 RJ-45 management interface, located at the rear of the chassis. 2 USB 3.0 interfaces, located at the rear of the chassis. 2 USB3.0 or USB2.0 are optional at the front of the chassis. 1 VGA interface, located at the rear of the chassis, optional. Supports front VGA 1 serial port (optional), located at the rear of the chassis 1 SD card slot, located inside the chassis |
Power Supply | Optional 550W or 1200W CRPS high-efficiency platinum hot-swappable power supply, supports 1+1 redundancy, voltage range 100-240Vac (please refer to the power input value on the host nameplate label) |
Fan Module | 3 hot-swappable fan modules |
Management Functions | Integrated BMC chip, providing a 1Gbps RJ45 management port to the outside world, supporting standard interfaces such as Redfish, SNMP, IPMI2.0, etc.; a remote management interface based on IKVM/HTML5, providing comprehensive fault diagnosis, automated operation and maintenance, and remote management functions |
Graphics Card | Integrated display controller, resolution 1920x1080 |
Operating System | Microsoft® Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, CentOS, Ubuntu, Vmware EXSI, etc. |
Operating Temperature | Working temperature: 5℃~40℃ (high temperature configuration supports 5℃-45℃, please contact us for details) |
Certified Product | Passed CCC and other certifications |
Chassis Specifications | 87.8mm (height) x 448mm (width) x729.8mm (depth) 87.8mm (height) x 482 (including case ears) mm (width) x729.8mm (depth) |
Full Weight | 35Kg (excluding guide rails) |