Home   Engineering Integration   Tool-Cable Inspection  NetScout LinkRunner AT Network Auto-Tester

NetScout LinkRunner AT Network Auto-Tester

Quick and complete copper and fiber network connectivity testing

Consult

NetScout LinkRunner AT Network Auto-Tester

 

  • Use network connectivity test to accurately test and identify network connectivity problems with the 10 second AutoTest
  • Network connectivity test for twisted pair and fiber optic Ethernet links at 10, 100 and Gigabit rates
  • Verify twisted pair Ethernet cable length and wiremap with the network cable tester
  • Measure Power over Ethernet under a load with the TruePower™ Power over Ethernet (POE) tester
  • Discover the nearest switch and VLAN
  • Save network connectivity test results on the network tester or in the cloud with zero-touch reporting
  • Streamline management of network connectivity test results, reports, projects and staff with the companion Link-Live Cloud Service
  • Select the right LinkRunner AT Network Auto-Tester for the job: LinkRunner AT Network Auto-Tester-2000 or LinkRunner AT Network Auto-Tester-1000. See the comparison chart for feature differences.

 

OVERVIEW

The LinkRunner AT Network Auto-Tester is the quickest and most complete copper and fiber cable network connectivity tester. This rugged, handheld network connectivity tester speeds troubleshooting and reporting with a comprehensive one-button AutoTest and zero-touch Link-Live cloud reporting. The LinkRunner AT Network Auto-Tester performs your required set of network connectivity tests in 10 seconds, enabling you to quickly and accurately identify and solve network connectivity problems. Cloud reporting automatically uploads network connectivity test results to the Link-Live Cloud Service for reporting and project management.

This network connectivity tester's key features include multiple user-configured AutoTests, cable length measurement, cable fault location and fault type, TruePower™ Power over Ethernet (PoE) tester, Ethernet speed and duplex verification at 10/100/Gigabit rates, fiber cable tester, twisted pair and fiber optic link testing, nearest switch identification, DHCP, DNS and Gateway connectivity tests, and Ping and TCP port connectivity tests to up to 10 user-selected targets. The network connectivity test results are saved on the network tester or automatically uploaded to the Link-Live Cloud Service with zero-touch. Manage network connectivity test results, projects and staff using the Link-Live Cloud Service. The LinkRunner AT Network Auto-Tester 2000 can also serve as a packet reflector at rates up to 1Gbps.

 

SPECIFICATIONS

Environmental
Operating Temperature and Relative Humidity 32ºF to 113ºF (0ºC to +45ºC) Note: The battery will not charge if the internal temperature of the tester is above 113ºF (45ºC)
Operating Relative Humidity (% RH without condensation) 90% (50ºF to 95ºF; 10ºC to 35ºC) 75% (95ºF to 113ºF; 35ºC to 45ºC)
Storage Temperature -4ºF to 140ºF (-20ºC to +60ºC)
Shock and Vibration Random, 2 g, 5 Hz-500 Hz (Class 2) 1 m drop
Safety EN 61010-1 2nd edition
Safety (LR-AT 2000 only) EN/IEC 60825-1:2007, EN/IEC 60825-2:2004+ A1:2007 (LRAT- 2000 only)
Altitude 4,000 m; Storage: 12,000 m
EMC FCC Part 15 Class A, EN 61326-1
Certifications and Compliance Conforms to relevant European Union directives Conforms to relevant Australian standards Listed by the Canadian Standards Association
General
Media Access; Copper RJ-45: 10BASE-T, 100BASE-TX, 1000BASE-T and PoE (IEEE 802.3af and 802.3at); 100BASE FX and 1000
Media Access; Fiber SFP Adapter Port supports 100BASE-FX and 1000BASE-LX/ SX/ZX (LRAT-2000 Only)
Cable Tests Pair lengths, opens, shorts, splits, crossed, straight through and cable ID
Power over Ethernet (PoE) Single ended testing:
  • User-defined testing to IEEE 802.3at class 0, 1, 2, 3, 4 without LLDP negation, or 4 with LLDP negotiation
  • The following PSE PoE parameters are measured:
    • Pairs used
    • Received class
    • PSE type
    • Unloaded voltage(V)
    • Loaded voltage (V) (LRAT-2000 with TruePower™)
    • Unloaded power (W) (LRAT-1000)
    • Loaded power (W) (LRAT-2000 with TruePower™)
Tone Generator IntelliTone™ digital tone: [500 KHz]; analog tones: [400 Hz, 1 KHz]
Dimensions 3.5 in x 7.8 in x 1.9 in (8.9 cm x 19.8 cm x 4.8 cm)
Weight 18 oz (0.5 kg)
Battery Removable, rechargeable lithium-ion battery pack (18.5 Watt-hrs) (included with introductory special)
Battery Life Typical operating life is 6 hours; Typical charge time is 3 hours
External AC Adapter/Charger AC input 90 to 264 Vac 48 to 62 Hz input power DC output 15 Vdc at 1.2 amps
Display 2.8 in color LCD (320 x 240 pixels)
Keypad 12-key elastomeric
LEDs 2 LEDs (Link and Receive/Transmit indicators)
Host Interface USB 5-pin mini-B
LinkRunner Manager Software
Supported Operating Systems Windows® Vista, Windows® XP, Windows® 7, Windows® 8
Processor 400 MHz Pentium processor or equivalent (minimum); 1 GHz Pentium processor or equivalent (recommended)
RAM 96 MB (minimum); 256 MB (recommended)
Hard Disk Up to 500 MB of available space may be required
Display 1024 x 768 high color, 32-bit (recommended)

 

 

 NetScout HandHeld Network Inspection Product List 

 

WIRED SOLUTIONS LinkRunner AT Network Auto-Tester
LinkRunner G2 Network Tester
OneTouch AT Network Assistant
LinkSprinter
WI-FI SOLUTIONS AirCheck G2 Wireless Tester
OPTIVIEW XG
OneTouch AT Network Assistant
TOP